One of the lightest and most versatile handle sets available. Slide these onto any iris rods that are spaced at 60 mm. The weight for this handle set is just one pound. Individual control of each handle is made possible via the two Spud Blocks on each handle allowing any angle or spacing desired. Handles shown are spaced 10 inches apart but can be adjusted to any width. The handle rods have an internal 1/2-13 thread allowing you to easily lengthen them to your needs by adding Rod Extensions  (sold separately).

This top handle kit for the FS700 gives you a great top handle and many mounting options. The accessory plate mounts to the two 1/4-20 holes on the top of the camera body plus the 1/4-20 on the hot shoe giving you solid mounting and all of the mounting points you will likely ever need. The top plate is ideal for mounting iris rods above your lens, an EVF or a monitor mount. This plate allows easy access to all of the camera control buttons, the factory monitor and installation takes less than one minute. Read the rest of this entry »

A remarkably light, easily adjustable solution for handles. Mount these on any 15 mm tube. Weight with hand grip, spud block, sleeves and rod is 192 grams.

This top mount accessory plate allows you to mount just about anything you can think of on top of your FS-700. The top plate is loaded with tapped holes in both the Berkey System standard and in RED standard spacing so that you can use any of our standard 15 mm accessories or any of our RED accessories to customize your FS-700 for your shooting style. Add handles, monitors, EVF's, top mount iris rods and more. Read the rest of this entry »

For ENG style shooting with the Sony FS-700, our dual rosette side handle kit is the way to go. One rosette mates with the factory Sony rosette on the side of the camera and the other rosette mates with the rosette of the Sony control handle. This relocates your factory handle to just where you want it. With this setup, the factory control handle can be pivoted, tilted, rotated and moved fore and aft for your comfort. Range of movement is 8 inches fore and aft and rotationally from the side rosette. Includes one 18 inch extension cord for the handle. Read the rest of this entry »

The top handle kit for the FS100 give you a great top handle and many mounting options. Why risk damaging your valuable camera body when there is a simple solution that offers additional protection and so many mounting options? The accessory plate mounts to the two 1/4-20 holes on the top of the  camera body plus the 1/4-20 on the hot shoe giving you solid mounting and all of the mounting points you will likely ever need. The top plate is ideal for mounting iris rods above your lens, an EVF or a monitor mount. Read the rest of this entry »

Rod Extensions are a convenient way to add to your rig. They are available in 3, 4, 6 and 9 inch lengths and are ideal for handle extensions or adding a counterweight to an existing rig.

Compatible with most other brands of rods with 1/2-13 threads.

Gain control of your controls with this dual handle set created for the Sony FS-700. This handle set utilizes our Sony Rosette to allow the user to use the factory Sony handle and controls. This is one of the lightest and most versatile handle sets available. Slide these onto any iris rods that are spaced at 60 mm. The weight for this handle set is just one pound. Individual control of each handle is made possible via the two Spud Blocks on each handle allowing any angle or spacing desired. Handles shown are spaced 10 inches apart but can be adjusted to any width. The handle rods have an internal 1/2-13 thread allowing you to easily lengthen them to your needs by adding Rod Extensions  (sold separately). Sony grip not included.

We've had quite a few customers asking for the Shorty grip assembly so we've added it to the line. The grip measures 3 inches long and the overall length is 5.25 inches long. The Delrin end cap ensures the the grip is firmly located and will not flex. The spud block allows it to be mounted on any 15 mm tube. It's a solid little grip. Weight is 98 grams.

 An ultralight and easily adjustable solution for handles. Mount these on any 15 mm tube. Weight with hand grip, spud block, sleeves and rod is 206 grams.

We've had quite a few customers asking for the Shorty grip assembly so we've added it to the line. Mount this grip on the end of any 15 mm tube The rubber grip portion measures 3 inches long and the overall length is 3.5 inches long. The Delrin end cap ensures the the grip is firmly located at the end of the tube and will not flex.  It's a solid little grip. Hex key included.

Top mounted dual handle set up. One Shorty handgrip and one standard handgrip make this one versatile grip set-up. Can be mounted in either direction. Center of grip is 3 inches above mounting position to allow the flip up monitor to move freely. There are nine tapped 1/4-20 holes on the sides of the handle mount so you can add additional components if you like. Mounting hole spacing is 36 mm. Two 1/4-20 fasteners included.

It's a handle. Two screws mount it to any 36 mm spaced holes. Mounting fasteners included.

After trying out many different grips, these were everyones favorite. The grips include our 7/8" to 15mm sleeves allowing them to be mounted anywhere on our 15mm rods. Grips are sold individualy.

Pair of 15mm to 7/8" sleeves. These sleeves allow you to use any standard size bicycle grip on any 15 mm rod and place the grip anywhere along the rod. You can also use your favorite grip by using these sleeves. Must be used with "lock-on" style bicycle grips. Sold in pairs.

An ultralight, easily adjustable solution for mounting handles or creating a rig. Mount these on any 15 mm tube. You can use these along with our Handle Grip Sleeves to mount any 7/8" clamp style grips you like. The rod is 15mm diameter and 6 inches long with a female 1/2-13 thread.

An ultralight and easily adjustable solution for mounting handles, a chest pad or creating a rig. Mount these on any 15 mm tube. You can use these along with our Handle Grip Sleeves to mount any 7/8" clamp style grips you like. The rod is 15mm diameter and 8 inches long with a female 1/2-13 thread. Sold individually.