The new Sony NEX FS-100 baseplate is now available. Developed specifically for the popular FS-100, this baseplate can be configured in a number of ways to achieve perfect balance for handheld use or on a tripod. The top plate can be moved forward or rearward so that if you are running a large lens out the front or rear mount battery or other accessories in the rear,  you will be able to achieve the balance you need. The top plate can also be used separately so you can mount your dovetail plate directly to the bottom of your camera.  Up and down iris rod height adjustability is available via the dual Quad Blocks that hold the iris rod so that you can accommodate just about any lens, follow focus and matte box combination. The bottom plate is drilled and tapped to allow you to add our Cross Clamp for creating a cage or adding additional handles or other accessories. Sold with 2 inch vertical risers. Camera knob and fasteners included.

Our DSLR baseplate is the most versatile baseplate system out there. Up and down adjustment of the iris rods can be controlled via the Quad Block, so the user can use any lens, follow focus and matte box combination. The overall height of the baseplate can be changed by using different length Vertical Posts which are available in 1.5, 2 and 2.5 inch lengths, 2 inch being the most common setup.  PL mount lenses with large diameters are easily accommodated with this baseplate.  The bottom plate is drilled to accept our Cross Clamp (shown) which gives the user the ability to attach any 15mm  rod at a right angle to the iris rods. This is a great way to create cages, handles or add memory devices.

This baseplate assembly provides a secure and solid mounting platform for large bodied cameras.  The tripod plate has enough mounting holes to attach to just about anything, including the offset mounting holes necessary for the ARRI bridge. Two mounting knobs, one on the front and the other on the rear, allow for secure camera mounting of the Sony PMW-F3 with or without tools, most other cameras use a single knob. The Quad Blocks provide vertical adjustment of the iris rods. The Camera Mounting Plate may be moved forward or back in 1/2 inch increments for balance adjustment. The Baseplate includes a set of  four 1 inch vertical risers in addition to the 1.5 inch risers shown. *Introductory price of $590.00.*

Our DSLR baseplate can be configured in many ways and here's the rock solid single quad version.  Vertical adjustment of the iris rods can be controlled via the quad block so the user can use any lens, follow focus and matte box combination.  The overall height of the baseplate can be changed by using different length Vertical Posts which are available in 1.5, 2 and 2.5 inch lengths, 2 inch being the most common for most setups.  PL mount lenses with large diameters are easily accommodated with this baseplate.  The top Camera Baseplate can be rotated 90 degrees to accommodate wide bodied cameras.

The  DSLR Baseplate Assembly with Dual Quads can be configured for many different types of cameras.  The Dual Quad blocks add additional versatility. When used with longer rails the dual quad blocks setup create a rock solid platform that allows the rear rails to be used for shoulder pads, battery packs, flash drives and more. Vertical adjustment of the iris rods can be easily changed via the Quad Blocks so the user can use any lens, follow focus and matte box combination. The top Camera Baseplate can be rotated 90 degrees to accommodate wide bodied cameras.

The Mikro base assembly makes the perfect camera mounting platform for lightweight run and gun rigs or any time weight is a concern. Adding the quad block to the Mikro base allows rods to be added for the use of a follow focus, matte box, handles and other accessories. This baseplate assembly works great with the Panasonic GH line of cameras because it allows the user access to the battery without removing the camera from the baseplate. The bottom plate is drilled for mounting of an optional  Cross Clamp. A locating hole  is provided for the registration pin used on most quick release mounts.

The Mikro base assembly makes the perfect camera mounting platform for lightweight run and gun rigs or any time weight is a concern. This baseplate assembly works great with the Panasonic GH line of cameras because it allows the user access to the battery without removing the camera from the baseplate. The bottom plate is drilled for the registration pin used on most quick release mounts. And it's just plain cool. One all aluminum knob is included.